Carburizer for steelmaking


Release Time:

Aug 04,2023

In steelmaking carburizing agent, carburizing agent is usually used to supplement and adjust the carbon content in liquid steel. Carburizing agent is the metallurgical material needed in steelmaking, which plays an important role in the internal organization of steel.

Carburizer for steelmaking

In steelmaking carburizing agent, carburizing agent is usually used to supplement and adjust the carbon content in liquid steel. Carburizing agent is the metallurgical material needed in steelmaking, which plays an important role in the internal organization of steel.

What is the main component of carburizing agent in steelmaking? As a carburizing agent, its main component is carbon. High quality steel carburizing agent in the adjustment of steel carbon content to improve the quality of steel at the same time, the content of harmful elements is low, not only effectively protect the environment to reduce harmful gas emissions, but also prevent the production of brittle steel caused by sulfur, at the same time, the higher the carbon composition, ash, volatile content and other debris is lower. In recent years, nitrogen composition has also been widely studied, nitrogen composition is too high, will lead to nitrogen pores, nitrogen composition is too low, the hardness of some castings is not good, more ferrite, so the content of nitrogen due to the use of different requirements of the end product content will be different.

Carburizing agent for steel making plays an important role in steel making, if there is no high quality special petroleum coke carburizing agent in steel making, it will break the balance of carbon elements in steel, will cause carbon in steel absorption rate is not good, resulting in serious slag of steel, in environmental protection will increase pollution, at the same time will cause a decline in the quality of steel. The use of steel carburizing agent in the use of too much or too little will affect the effect of the use of products, so in the process of use must understand clearly the use of carburizing agent measurement and use need to pay attention to the place, so as to improve the quality of the end product, carbon will provide special carburizing agent solutions according to the customer’s end needs, To provide customers with high quality products and services is our ultimate goal.

In summary, it is not difficult to see that the importance of carburizing agent in steelmaking is very obvious, so it is particularly important to choose a carburizing agent suitable for the end product.